New Products

The most recently released toys are gathered here for your convenience, as well as in their appropriate category.

  • You've just added this product to the cart:

    Hippy Hangout

    5.00 out of 5

    Hippy Hangout

    The super cute Hippy Hangout is a hanging swing toy that is great for  small birds from Budgies to Conures. Your parrot will swing, climb and chew on this fun, safe toy that is handmade by me! The natural (un-coloured) vine rings and colourful beads are threaded onto stainless steel wire, with a mini pacifier hanging from the bottom of each end. The Hippy Hangout measures 28cm tall and 13cm in diameter. It doesn't come with a hanging link, though you can choose to add one of your choice. It was for a brief time called "Rainbow Halo Swing", until the suggestion of Hippy Hangout was chosen via a Facebook poll when I had just designed the toy.
    $22.70

    or 4 payments of $5.68 with Afterpay

  • 0 out of 5

    Vine Tweeter Totter

    The new Vine Tweeter Totter toy, made by Super Bird Creations, is a cute fun toy for the little ones. Your small parrot will enjoy exploring, chewing and preening at the shredded crinkly paper that explodes out of the 4cm vine ball, playing with the small vine rings that hang from the horizontal paddlepop bar, jingling the bell and turning the timber beads. All products are cotton free and colouring is food safe dye. It comes with nickel plated hardware, including a pear clip. This toy measures 19cm tall (total, including pear clip and bell) and 13cm wide.
    $13.70
  • You've just added this product to the cart:

    Soft Sisal Boing - Hanging Spiral Perch Small

    Hot
    5.00 out of 5

    Soft Sisal Boing – Hanging Spiral Perch Small

    A sisal boing that is long but with thin rope suitable for Budgies through to Indian Ringnecks. It is similar in size to the Small Paradise toys boing (PT364), though with sisal that is darker brown and softer.This boing measures 175cm long (total rope length) and the rope is 1.5cm in diameter. With wire inside the rope, you can shape the boing to sit how you'd like it to. It typically sits 60 to 80cm tall when in wide loops as shown in the image.
    $28.70

    or 4 payments of $7.18 with Afterpay

  • You've just added this product to the cart:

    Adding Tape Bagel Toy

    0 out of 5

    Adding Tape Bagel Toy

    Large, thick Birdy Bagels, large vine balls, paper roll and paddle pop sticks (coloured with food safe dye) all hanging on a length of nickel plated chain with a jingly bell. There's even some shredded crinkly paper inside the vine balls - what is there not to love?! This new bird toy will suit most bird breeds, but is ideal for medium parrots. There's plenty to chew and explore with a variety of textures. Measures 35cm tall, 13cm wide and 5cm deep in total and hangs from a nickel plated chain and pear clip.
    $24.60

    or 4 payments of $6.15 with Afterpay

  • 0 out of 5

    Sparkle Tree on Leather

    One for the lovers of leather! This hanging bird toy has lots of soft, vegetable tanned leather for your bird to chew on and explore with their beak. Attached along the way, there are many plastic beads of different shapes and sizes.The bigger cousin of the 'Jellyfish' toy, which has been popular for a long time, this toy made by Scooter Z's has a stainless steel small quick link to hang the toy from. The 'Sparkle Tree' measures a total of 30cm long (including hanging link) and the body of the toy is roughly 25cm tall and 11cm wide. This toy can be refilled with fresh leather and plastic beads as required too!
    $23.40

    or 4 payments of $5.85 with Afterpay

  • You've just added this product to the cart:

    Bird Kabob Ole' Senior Yucca Chew

    5.00 out of 5

    Bird Kabob Ole’ Senior Yucca Chew

    The Ole' Senior toy by Bird Kabob is made with a really big stalk of yucca. It has much of the hard, outer stalk on the outside, but with holes cut out to get your bird started on the chewing joy that is yucca. It measures a total of 38cm long and the yucca log itself is 22cm long and 9cm in diameter.It does not come with a hanging link, which can be purchased separately. Yucca is a type of plant and these pieces of the dried stalk are extra enjoyable for your bird to chew. Also suitable for rodents who love to munch at the soft fibres too! As a natural item, each toy will vary slightly and may have areas of changed colour or texture. Yucca, also known as 'yukka'.
    $17.80

    or 4 payments of $4.45 with Afterpay

  • You've just added this product to the cart:

    Parts Refill for Twister Kabob

    0 out of 5

    Parts Refill for Twister Kabob

    Please be aware that this item DOES NOT include the spiral skewer that is shown in some images. The Twister Kabob is available separately. This product listing is for refills of parts to suit the Twister Kabob, though the parts can be used for other skewers or to make your own foot toys etc.  Each naturals pack will contain a fair mix of natural seed pods (Gumnuts, Banksia, Liquid Amber) and branch pieces, which may be green or dry depending on seasonal availability. Examples are shown in the photos, though may vary between each pack. Large holes are drilled in each part for them to be threaded onto the skewer. The size of hole required is not compatible with some parts, therefore items like Pinecones, Casuarina and small Gumnuts won't be included.You can also browse the toy parts section of the store to find other things you might like to add, like leather and other mixes of the parts mentioned in the options.
    $8.00
  • You've just added this product to the cart:

    Twister Kabob Stainless Steel Toy Skewer 30cm

    4.00 out of 5

    Twister Kabob Stainless Steel Toy Skewer 30cm

    A high quality and very safe stainless steel skewer that can be used to hang just about anything in your birds' cage. This particular design is in a spiral shape and makes a great toy base. Make your own creations with toy parts or native seed pods and branches. The best part is, it's all refillable!You can also use this like a normal skewer for fruits and vegetables, foraging balls, foraging boxes and all kinds of other items. Also great for Rabbits and pocket pets. This skewer is different in that the end cannot be easily unscrewed by your bird, a great solution for larger birds or those that make it their mission to un-do all their toys! The clever design means that your parrot cannot sufficiently grip the part that un-screws, to be able to un-do it. The ball end is made from hard parrot-safe acrylic. Better yet, you can hang the skewer by holding the metal part inside the cage and the ball outside, then screw together, through the bars so that the ball sits on the outside. The total length of this item is 30cm. Due to the way the skewer spirals around, the usable part of the skewer is also 30cm long and the acrylic ball is 3.5cm in diameter. Suitable for all breeds of parrots and it comes with a nickel plated quick link. This is made by Super Bird Creations, but comes without a tag. It is not the same brand as the Hangin' Round straight skewers that I also stock, though it is very similar in design.
    $21.50

    or 4 payments of $5.38 with Afterpay

  • You've just added this product to the cart:

    The Percher by Caitec - Training T Perch

    5.00 out of 5

    The Percher by Caitec – Training T Perch

    Keep out-of-cage time fun, safe and clean wherever you go! The innovative Caitec Percher offers a portable and novel way to keep bird training and companionship more rewarding. Clever, four-piece design allows use as a hand-held or free-standing perch perfect for training sessions or just hanging out. Create seven unique bird perches by assembling the pieces in the configuration that best suits your needs. This well designed perch can sit on most styles of digital kitchen scale, so it's great for weighing your bird as well as for training. Check out the photo for examples of the different ways this clever perch can be used. Don't forget to scroll down to see the video of my own birds using theirs.
    $29.70

    or 4 payments of $7.43 with Afterpay

  • You've just added this product to the cart:

    Bolt on Natural Branch Perch - 20cm - Thick

    5.00 out of 5

    Bolt on Natural Branch Perch – 20cm – Thick

    These bolt on perches are a great addition to your birds' cage. They are easy to attach to the inside or outside of the cage and can also be used in aviaries. Each natural branch has been hand selected by me from safe, native trees and all have bark on them, so they're great for your parrot to chew as well as being good for their feet and beak. There is a mix of Paperbark, Bottle Brush, Wattle, Eucalypt and other native branches. If you have a preference of which type you receive, please mention this in your order notes and I will do my best to accommodate. Please note, all types might not be available at all times. The branch of these perches measure roughly 20cm long (allow for a difference of 1-2cm) and come with a wingnut and 2 washers. The perch diameter varies from 2.5cm - 5cm and suits medium to large parrots. Please specify in your order notes, which breed of bird they are for so I can select the branches to suit. This item has all stainless steel hardware for maximum safety for your bird. The washers are 32mm in diameter, so suit most cage bars. Larger washers are available for cages with bar spacing of 2cm or more, to attach the perches with ease. The bolt coming out of the perch is 5cm long and suitable for all cage and aviary bars. This shorter size perch is ideal for use on the inside of your birds' cage door (most doors that swing outwards are big enough to have the perch move in and out of the door space with it). The last 2 photos show and example of this in one of my own birds' cages. For thinner perches and other lengths, please see HERE
    $9.50
  • You've just added this product to the cart:

    Bolt on Natural Branch Perch - 20cm - Thin

    0 out of 5

    Bolt on Natural Branch Perch – 20cm – Thin

    These bolt on perches are a great addition to your birds' cage. They are easy to attach to the inside or outside of the cage and can also be used in aviaries. Each natural branch has been hand selected by me from safe, native trees and all have bark on them, so they're great for your parrot to chew as well as being good for their feet and beak. There is a mix of Paperbark, Bottle Brush, Wattle, Eucalypt and other native branches. If you have a preference of which type you receive, please mention this in your order notes and I will do my best to accommodate. Please note, all types might not be available at all times. The diameter of these 'thin' perches varies from 1.5cm - 2.3cm and suit small parrots. I am unable to make them thinner due the size of the hole required for the bolt. This item has all stainless steel hardware for maximum safety for your bird. The washers are 32mm in diameter, so suit most cage bars. The branch of these perches measure roughly 20cm long (allow for a difference of 1-2cm) and come with a wingnut and 2 washers. This shorter size is ideal for use on the inside of your birds' cage door (most doors that swing outwards are big enough to have the perch move in and out of the door space with it). For thicker perches and other lengths, please see HERE. While a shorter bolt is used for these thinner perches, the price is the same as the thicker perches with larger bolts. This is because the thin ones are more fiddly and time consuming to make and I loose more branches in the process of making them, due to splitting. The short bolt is suitable for typical cage bars for Budgies/Cockatiels and 1cm aviary mesh. The bolt protrudes roughly 12mm from the perch, leaving 4mm exposed when the washers and wingnuts are on, before the cage bars are between them. For thicker bars (larger parrot cages), the longer bolt of the thick perches will be required).
    $9.50
  • You've just added this product to the cart:

    Bolt on Natural Branch Perch - 25cm - Thick

    5.00 out of 5

    Bolt on Natural Branch Perch – 25cm – Thick

    These bolt on perches are a great addition to your birds' cage. They are easy to attach to the inside or outside of the cage and can also be used in aviaries. Each natural branch has been hand selected by me from safe, native trees and all have bark on them, so they're great for your parrot to chew as well as being good for their feet and beak. There is a mix of Paperbark, Bottle Brush, Wattle, Eucalypt and other native branches. If you have a preference of which type you receive, please mention this in your order notes and I will do my best to accommodate. Please note, all types might not be available at all times. The branch of these perches measure roughly 25cm long (allow for a difference of 1-2cm) and come with a wingnut and 2 washers. The perch diameter varies from 2.5cm - 5cm and suits medium to large parrots. Please specify in your order notes, which breed of bird they are for so I can select the branches to suit. This item has all stainless steel hardware for maximum safety for your bird. The washers are 32mm in diameter, so suit most cage bars. Larger washers are available for cages with bar spacing of 2cm or more, to attach the perches with ease. The bolt coming out of the perch is 5cm long and suitable for all cage and aviary bars. For thinner perches and other lengths, please see HERE
    $10.00
  • You've just added this product to the cart:

    Bolt on Natural Branch Perch - 25cm - Thin

    Hot
    0 out of 5

    Bolt on Natural Branch Perch – 25cm – Thin

    These bolt on perches are a great addition to your birds' cage. They are easy to attach to the inside or outside of the cage and can also be used in aviaries. Each natural branch has been hand selected by me from safe, native trees and all have bark on them, so they're great for your parrot to chew as well as being good for their feet and beak. There is a mix of Paperbark, Bottle Brush, Wattle, Eucalypt and other native branches. If you have a preference of which type you receive, please mention this in your order notes and I will do my best to accommodate. Please note, all types might not be available at all times. The diameter of these 'thin' perches varies from 1.5cm - 2.3cm and suit small parrots. I am unable to make them thinner due the size of the hole required for the bolt. This item has all stainless steel hardware for maximum safety for your bird. The washers are 32mm in diameter, so suit most cage bars. The branch of these perches measure roughly 25cm long (allow for a difference of 1-2cm) and come with a wingnut and 2 washers. For thicker perches and other lengths, please see HERE. While a shorter bolt is used for these thinner perches, the price is the same as the thicker perches with larger bolts. This is because the thin ones are more fiddly and time consuming to make and I loose more branches in the process of making them, due to splitting. The short bolt is suitable for typical cage bars for Budgies/Cockatiels and 1cm aviary mesh. The bolt protrudes roughly 12mm from the perch, leaving 4mm exposed when the washers and wingnuts are on, before the cage bars are between them. For thicker bars (larger parrot cages), the longer bolt of the thick perches will be required).
    $10.00
  • You've just added this product to the cart:

    Bolt on Natural Branch Perch - 30cm - Thick

    Hot
    5.00 out of 5

    Bolt on Natural Branch Perch – 30cm – Thick

    These bolt on perches are a great addition to your birds' cage. They are easy to attach to the inside or outside of the cage and can also be used in aviaries. Each natural branch has been hand selected by me from safe, native trees and all have bark on them, so they're great for your parrot to chew as well as being good for their feet and beak. There is a mix of Paperbark, Bottle Brush, Wattle, Eucalypt and other native branches. If you have a preference of which type you receive, please mention this in your order notes and I will do my best to accommodate. Please note, all types might not be available at all times. The branch of these perches measure roughly 25cm long (allow for a difference of 1-2cm) and come with a wingnut and 2 washers. The perch diameter varies from 2.5cm - 5cm and suits medium to large parrots. Please specify in your order notes, which breed of bird they are for so I can select the branches to suit. This item has all stainless steel hardware for maximum safety for your bird. The washers are 32mm in diameter, so suit most cage bars. Larger washers are available for cages with bar spacing of 2cm or more, to attach the perches with ease. The bolt coming out of the perch is 5cm long and suitable for all cage and aviary bars. For thinner perches and other lengths, please see HERE
    $10.50
  • You've just added this product to the cart:

    Bolt on Natural Branch Perch - 30cm - Thin

    0 out of 5

    Bolt on Natural Branch Perch – 30cm – Thin

    These bolt on perches are a great addition to your birds' cage. They are easy to attach to the inside or outside of the cage and can also be used in aviaries. Each natural branch has been hand selected by me from safe, native trees and all have bark on them, so they're great for your parrot to chew as well as being good for their feet and beak. There is a mix of Paperbark, Bottle Brush, Wattle, Eucalypt and other native branches. If you have a preference of which type you receive, please mention this in your order notes and I will do my best to accommodate. Please note, all types might not be available at all times. The diameter of these 'thin' perches varies from 1.5cm - 2.3cm and suit small parrots. I am unable to make them thinner due the size of the hole required for the bolt. This item has all stainless steel hardware for maximum safety for your bird. The washers are 32mm in diameter, so suit most cage bars. The branch of these perches measure roughly 30cm long (allow for a difference of 1-2cm) and come with a wingnut and 2 washers. For thicker perches and other lengths, please see HERE. While a shorter bolt is used for these thinner perches, the price is the same as the thicker perches with larger bolts. This is because the thin ones are more fiddly and time consuming to make and I loose more branches in the process of making them, due to splitting. The short bolt is suitable for typical cage bars for Budgies/Cockatiels and 1cm aviary mesh. The bolt protrudes roughly 12mm from the perch, leaving 4mm exposed when the washers and wingnuts are on, before the cage bars are between them. For thicker bars (larger parrot cages), the longer bolt of the thick perches will be required).
    $10.50
  • You've just added this product to the cart:

    Feather Weight Foot Toys (2 sizes)

    5.00 out of 5

    Feather Weight Foot Toys (2 sizes)

    These Feather Weight foot toys are so versatile! You can use them for foraging as you can hide food in the ridges of each 'bobble' for your bird to dig out. They can be given as a foot toy and the mini ones can be put inside many other foraging toys or hidden around the cage. The rings can be used as toy parts, hung from other toys, given as a foot toy or placed around your birds' perches. Because they are made as kids toys, with non-toxic plastic, they are as safe as possible for your bird to chew. I use these daily for my own birds, hiding seeds and small pellets in the ridges and using them through the foraging toys in their cages. Take a look at all the videos in the tab below of the various foot toys in use. Please note the videos also show the 'small and medium' ones in use. These sizes are currently unavailable, but the mini (single ball) and rings (5 balls in a loop) are available. Each ball is about 2cm in diameter and are available in blue, green, yellow, orange, pink, purple and red as pictured. A random selection of colours will be chosen for you unless otherwise requested.
    $0.60$2.40